woodanswers
About UsContact Us
Search







The Woodscribe is an e-mail newsletter that profiles people who love to work with wood. Click here to subscribe.
BROUGHT TO YOU BY VARATHANE, WATCO, WOLMAN, ZINSSER AND PRO FINISHER PREMIUM WOOD FINISHING PRODUCTS
VarathaneWatco
WolmanZinsser
Pro Finisher
Premium Spar UrethaneBack to Finish and Protect

Formulated for maximum clarity and durability, Varathane Oil-Based Urethane Outdoor Wood Finishes offer the best scratch and impact resistance of any major brand. Varathane Urethane Outdoor Wood Finishes also feature powerful UV absorbers to guard your wood from sun damage while adding years of beauty.

  • Extra fast-drying
  • Self-leveling
  • Formulated to expand and contract with weather conditions

    • STEP BY STEP DIRECTIONS   |   TOOLS & SUPPLIES
    STEP BY STEP DIRECTIONSNEXT
    PAGE: 1 2 3 4
    .........................................................................................................................................
    STEP 1: Stir thoroughly before and during use. To prevent bubles in the finish, DO NOT SHAKE.
    STEP 2: Apply using a good quality, natural bristle brush or applicator.
    STEP 3: Allow finish to dry 4 hours and then re-coat. Lower temperatures and/or higher humidity may cause slower dry times. Re-coat only when previous coats have dried clear and feel hard (no longer tacky to the touch). If any coat has dried more than 12 hours, lightly sand before re-coating.
    STEP 4: Apply additional coats follwing directions above. A minimum of three coats is recommended. Allow finish to dry 24 hours before light use and three days before subjecting the surface to normal usage.
    .........................................................................................................................................
    NEXT
    PAGE: 1 2 3 4
    Copyright © 2008 Rust-Oleum, Inc. All rights reserved.Site Map  |  Privacy Policy